Shanghai Xitang Biotechnology Co., Ltd. 021-55229872, 65333639
Rat N- terminal pro-brain natriuretic peptide (NT-pro BNP) ELISA kit
principle
This experiment used double antibody sandwich ABC-ELISA. The anti-rat NT-pro BNP monoclonal antibody was coated on the plate, the NT-pro BNP in the standard and the sample was combined with the monoclonal antibody, and biotinylated anti-rat NT-pro BNP was added to form an immune complex. Attached to the plate, horseradish peroxidase-labeled Streptavidin is combined with biotin, the substrate working solution is blue, and finally the stop solution sulfuric acid is added, and the OD value is measured at 450 nm, and the NT-pro BNP concentration and the OD value are In proportion, the concentration of NT-pro BNP in the specimen can be determined by plotting a standard curve.
Kit composition ( 2-8 ° C preservation)
Coated Wells | 96 holes | Enzyme Conjugate | 12ml |
10× specimen dilution (Sample Buffer) | 12ml | 20×Wash Buffer | 50ml |
Standards: 4ng/bottle | 2 bottles | Substrate working fluid (TMB Solution) | 12ml |
Primary antibody working solution (Biotinylated Antibody) | 12ml | Stop Solution | 12ml |
Prepare reagents and collect blood samples
1. Collection of specimens: serum, plasma (EDTA), cell culture supernatant, tissue homogenate, urine, etc., as soon as possible, stored at 2-8 ° C for 48 hours; longer time must be frozen (-20 °C or -70 °C) Save to avoid repeated freezing and thawing.
2. Standard solution preparation: Add 1ml of distilled water before use and mix well to form a solution of 4000pg/ml. Set 8 tubes of standard tube, and add 200 ul of standard dilution solution to each tube. Add 200 ul of the standard solution of 4000 pg/ml to the first tube, mix and aspirate 200 ul with the sampler, and transfer to the second tube. Repeat the dilution as described above, and aspirate 200 ul from the seventh tube and discard it. The eighth tube is a blank control.
3. The 10× specimen dilution was diluted 1:10 with distilled water (example: 1 ml concentrated dilution + 9 ml distilled water).
4. Washing solution: diluted 1:20 with distilled water (example: 1 ml concentrated washing solution added to 19 ml of distilled water)
Test procedure
1. Loading: Add 100 ul of standard or sample to be tested in each well. Mix the reaction plate thoroughly and let it stand at 37 °C for 120 minutes.
2. Wash the plate: Wash the plate thoroughly with washing solution 4-6 times, and dry it on the filter paper.
3. Add 100 ul of the first antibody working solution to each well. The reaction plate was thoroughly mixed and placed at 37 ° C for 60 minutes.
4. Wash the board: the same as before.
5. Add 100 ul of enzyme-labeled antibody working solution per well. The reaction plate was placed at 37 ° C for 30 minutes.
6. Wash the board: same as before.
7. Add 100 ul of substrate working solution per well, set 37 The reaction was carried out in the dark at °C for 15 minutes.
8. Add 100 ul of stop solution to each well and mix.
9. Measure the absorbance at 450 nm using a microplate reader within 30 minutes.
Result calculation and judgment
1. All OD values ​​should be subtracted from the blank value before calculation.
2. Take the standard products 2000, 1000, 500, 250, 125, 62.5, 31.2, 0 pg/ml as the abscissa and OD as the ordinate. Draw on the coordinate paper and draw the standard curve.
3. Find the corresponding NT-pro BNP content on the graph based on the OD value of the sample.
Kit performance
1. Sensitivity: The minimum NT-pro BNP detection concentration is less than 15pg/ml.
2. Specificity: Recombinant or natural rat NT-pro BNP can be detected simultaneously. Does not cross-react with other cytokines in rats.
3. Repeatability: The coefficient of variation in the plate and plate is less than 8.9%.
Precautions
1. It is recommended to make double holes for the above standard holes and samples to be tested. The standard curve should be made at the same time for each measurement.
2. The washing process is critical. Insufficient washing will result in an accuracy error and an erroneous rise in the OD value.
3. After the slats are opened, the remaining slats should be sealed again to keep the slats dry .
4. This kit should be stored in a 4 o C refrigerator.
5. This kit is for scientific research only and cannot be used for clinical diagnosis!
Hot Air Circulation Drying Machine for drying fruits and vegetables adopts hot air circulation principle, the dryer is equipped with low noise and heat-stable axial flow fan and automatic temperature control system.And the dryed fruits and vegetables such as apples, pineapple, pawpaw, coconut, mango, banana, spice, sea cucumber, seaweeds, beef jerky, fish, onions, gingers, chili, pepper, cabbage, carrots, also tea leaves, herbs and herbal pieces are uniform and bright color as well as good taste. It is widely used in food, chemical also medical field.
Hot Air Circulation Drying Machine
Hot Air Drying Machine,Circulation Drying Machine,Air Circulation Drying Machine, Drying Machine Air Circulation
Zhucheng Tongxi Commercial And Trade Co.,Ltd. , https://www.blackgarlicgroup.com