Combining the experience of multiple parties, when using the following techniques, the fuel consumption and operating costs can be greatly reduced.

First, try to use "fast file". In the case that the size of the paddy field is appropriate and the field ditch does not affect the operation, in addition to the opening and the left plow, the operator should try to use the “fast gear” operation, and the throttle should be increased to a suitable large position to make the engine speed close. Or increase to the rated speed. However, decelerate in time when turning to ensure safe operation.

Second, the depth of cultivation should be moderate. The depth of the tillage operation should be moderate, so as to meet the requirements of tillage. Because it is too deep, it will increase fuel consumption, reduce work efficiency, and increase the cost of cultivation. The depth of paddy field is generally 10-12 cm. The width should make full use of the tearing effect on the soil during tillage, so that the width of the tillage is increased to 24-26 cm. Because the width of the tillage is too narrow, it will reduce the work efficiency and increase the fuel consumption; if it is too wide, there will be a phenomenon of leakage tillage between adjacent furrows, which will not meet the requirements of tillage. As long as the drive wheel is driven close to the uncultivated land, a satisfactory width and ideal tillage effect can be obtained.

Third, the width and depth of the tillage should be stable. When you are ploughing, try to go straight and straighten. To achieve this standard, you must first find the appropriate branch location, select the target at the other end, and concentrate on the job. If you feel the deviation of the fuselage, you should correct it in time. Irregular deformed fields should be shaped and ploughed, making the cultivation smooth and smooth. When ploughing, do not step on the lifting pedal of the farm implement, so as not to affect the determination of the depth of the tillage, resulting in instability and unevenness.

Fourth, the throttle should be lightly pushed and pulled. Try to avoid emptying in the field during the operation. And reduce the weight of the counterweight on the balance board (usually mostly soil), which can reduce the driving resistance, but pay special attention to the unit balance to ensure the quality of the cultivation.
(初阳)