Model NO.: HT1114
Trademark: ECOWIS
Origin: China
Model NO.: HT1114
Trademark: ECOWIS
Origin: China
Low Pressure Outdoor Patio Misting System
Item No.: HT1104
Desp.: Water Misting Systems Outdoor Cooling, Misting Cooling Systems Outdoors
The Portable Outdoor Mist Cooling System provides relief from the heat wherever you need it.
This preassembled kit provides mist cooling and cools the surrounding air temperatures by up to 11 degrees Celcius.
Simply attach the convenient alligator clips to an umbrella, awning, fence or other structure and then connect to a standard garden hose to immediately experience the benefit of mist cooling.
No power is required. (low pressure, connect to the facuet is OK)
Great for providing outdoor cooling wherever you need it.
Installs in less than 10 minutes.
Attaches to any standard garden hose.
For outdoor use with cold water only.
Â
| Product Name |
Low Pressure Outdoor Patio Misting System |
| Tube length available |
6m/Â 9m/Â 12m/Â 15m |
| Tube Material |
Food-grade PE |
| Vinyl Tubing Size |
1/4" |
| Nozzle Material |
Brass with stainless steel plate |
| Nozzle Orifice dia |
0.2mm/Â 0.3mm/Â 0.4mm/Â 0.5mm |
| Nozzle Srew Type |
3/8"Â 10/24"Â 12/24"Â UNC |
| Nozzle Base Material |
PVC |
| Flow Rate |
0.3-2L/min per nozzle |
| Max Pressure |
45psi ( 30 Bar) |
| Ability |
Cool down 7-10ºC around temperature |
Â
| Item |
Parts List |
| HT1114-06 |
3M water supply hose with 3/4" garden hose adaptor
3M  misting line with 6 nozzle bases
8pcs brass nozzles (2 for spare).
20pcs saddle clamps, 20pcs cable ties. |
| HT1114-09 |
3M water supply hose with 3/4" garden hose adaptor
6M  misting line with 6 nozzle bases
13pcs brass nozzles (2 for spare).
30pcs saddle clamps, 30pcs cable ties. |
| HT1114-12 |
3M water supply hose with 3/4" garden hose adaptor
9M  misting line with 6 nozzle bases
18pcs brass nozzles (2 for spare).
40pcs saddle clamps, 40pcs cable ties. |
| HT1114-15 |
3M water supply hose with 3/4" garden hose adaptor
12M  misting line with 6 nozzle bases
23pcs brass nozzles (2 for spare).
50pcs saddle clamps, 50pcs cable ties. |
 Installation Instruction:
All fittings should be installed by working the tubing through the hole. No leakage will occur when properly installed.
1) Â Screw in the nozzles into the fittings until finger tight. Do not over-tighten.
2) Â Insert tubing into small end of Garden Hose Adapter and push screen filter into threaded end with cone pointing out. Connect Hose Adapter with attached tubing to water supply and unroll hose to determine desired placement. Avoid locations with prolonged exposure to direct sunlight if possible.Â
3) Â Determine desired spacing for installation of misting tees (recommended spacing 2-3 feet). Using scissors, cut hose and insert misting tees in desired position along the length of tubing.
4) Â After misting tees have been installed, cut off any excess tubing and install End Elbow to complete the system. Save the excess tubing in the event that you choose to expand the system further in the future.
5) Â Use included nail-on clamps to fasten tubing to the mounting surface.
Â
Low Pressure Outdoor Patio Misting System
Item No.: HT1104
Desp.: Water Misting Systems Outdoor Cooling, Misting Cooling Systems Outdoors
The Portable Outdoor Mist Cooling System provides relief from the heat wherever you need it.
This preassembled kit provides mist cooling and cools the surrounding air temperatures by up to 11 degrees Celcius.
Simply attach the convenient alligator clips to an umbrella, awning, fence or other structure and then connect to a standard garden hose to immediately experience the benefit of mist cooling.
No power is required. (low pressure, connect to the facuet is OK)
Great for providing outdoor cooling wherever you need it.
Installs in less than 10 minutes.
Attaches to any standard garden hose.
For outdoor use with cold water only.
Â
| Product Name |
Low Pressure Outdoor Patio Misting System |
| Tube length available |
6m/Â 9m/Â 12m/Â 15m |
| Tube Material |
Food-grade PE |
| Vinyl Tubing Size |
1/4" |
| Nozzle Material |
Brass with stainless steel plate |
| Nozzle Orifice dia |
0.2mm/Â 0.3mm/Â 0.4mm/Â 0.5mm |
| Nozzle Srew Type |
3/8"Â 10/24"Â 12/24"Â UNC |
| Nozzle Base Material |
PVC |
| Flow Rate |
0.3-2L/min per nozzle |
| Max Pressure |
45psi ( 30 Bar) |
| Ability |
Cool down 7-10ºC around temperature |
Â
| Item |
Parts List |
| HT1114-06 |
3M water supply hose with 3/4" garden hose adaptor
3M  misting line with 6 nozzle bases
8pcs brass nozzles (2 for spare).
20pcs saddle clamps, 20pcs cable ties. |
| HT1114-09 |
3M water supply hose with 3/4" garden hose adaptor
6M  misting line with 6 nozzle bases
13pcs brass nozzles (2 for spare).
30pcs saddle clamps, 30pcs cable ties. |
| HT1114-12 |
3M water supply hose with 3/4" garden hose adaptor
9M  misting line with 6 nozzle bases
18pcs brass nozzles (2 for spare).
40pcs saddle clamps, 40pcs cable ties. |
| HT1114-15 |
3M water supply hose with 3/4" garden hose adaptor
12M  misting line with 6 nozzle bases
23pcs brass nozzles (2 for spare).
50pcs saddle clamps, 50pcs cable ties. |
 Installation Instruction:
All fittings should be installed by working the tubing through the hole. No leakage will occur when properly installed.
1) Â Screw in the nozzles into the fittings until finger tight. Do not over-tighten.
2) Â Insert tubing into small end of Garden Hose Adapter and push screen filter into threaded end with cone pointing out. Connect Hose Adapter with attached tubing to water supply and unroll hose to determine desired placement. Avoid locations with prolonged exposure to direct sunlight if possible.Â
3) Â Determine desired spacing for installation of misting tees (recommended spacing 2-3 feet). Using scissors, cut hose and insert misting tees in desired position along the length of tubing.
4) Â After misting tees have been installed, cut off any excess tubing and install End Elbow to complete the system. Save the excess tubing in the event that you choose to expand the system further in the future.
5) Â Use included nail-on clamps to fasten tubing to the mounting surface.
Â
With medical grade material Polypropylene(PP) and Polyethylene(LDPE, LLDPE), Sorfa Dropper Bottles are made by automatic injection molding and blowing . It's leak-proof during the usage and transporation. In addition, drop volume is under control within 6% error. Being non-pyrogenic and available for sterilization, dropper bottle is resistant to regular chemical solution. Variety of size and color are for choices.
Product Features:
Made from medical grade PP and PE
Excellent seal design is leak-proof
Various size and color for choice
Packing Information:
Labeling on outer carton is available
Strong Polybag inside prevent contaminating
Cartons are customized for protecting products
|
Cat No.
|
Volume
|
Per Drop
|
Height
|
Cape Color
|
Diameter
|
Material
|
Bottle Color
|
Packing
|
|
D315-1
|
20 ml
|
70µl
|
79 mm
|
White
|
25 mm
|
PE, PP
|
white
|
2,000 pcs/ctn
|
|
D315-2
|
20 ml
|
70µl
|
79 mm
|
Red
|
25 mm
|
PE, PP
|
white
|
2,000 pcs/ctn
|
|
D315-3
|
20 ml
|
70µl
|
79 mm
|
Blue
|
25 mm
|
PE, PP
|
white
|
2,000 pcs/ctn
|
|
D315-4
|
20 ml
|
70µl
|
79 mm
|
Green
|
25 mm
|
PE, PP
|
white
|
2,000 pcs/ctn
|
|
D315-5
|
20 ml
|
70µl
|
79 mm
|
Yellow
|
25 mm
|
PE, PP
|
white
|
2,000 pcs/ctn
|
Dropper Bottles
Drop Bottle, Plastic Wash Bottles, Plastic Dropper Bottles, Disposable Dropper Bottles
Zhejiang Sorfa Medical Plastic Co., Ltd. (Ningbo Jiangdong Aron Imp&Exp. Co.LTD) , http://www.sorfapipettes.com