Changzhou Binda Dry Granulation Equipment Co., Ltd. specializes in making double cone rotary vacuum dryer. It can be used with condenser, heat transfer oil tank, etc. The material can be made of stainless steel or carbon steel, according to customer requirements.

one, Double cone rotary vacuum dryer principle:

â—Ž Heat energy (such as hot water, low-pressure steam or heat-conducting oil) is introduced into the closed interlayer, and heat is transferred to the dried material through the inner casing.

â—Ž Under the power drive, the tank body rotates slowly, and the materials in the tank are continuously mixed to achieve the purpose of strengthening and drying.

â—ŽThe material is in a vacuum state, the vapor pressure drops so that the water (solvent) on the surface of the material reaches a saturated state and evaporates, and is discharged and recovered in time by a vacuum pump. The water (solvent) inside the material continuously permeates, evaporates and discharges to the surface, and the materials are continuously dried in a short time.

two, Double cone rotary vacuum dryer adapts to materials:

It is suitable for the concentration, mixing, drying and low temperature drying of powders, granules and fibers in chemical, pharmaceutical and food industries (such as biochemical products). It is more suitable for drying of materials that are easily oxidized, volatile, heat sensitive, strongly irritating, toxic materials and materials that are not allowed to damage crystals.