Extruding ink is a must-have step for high-resolution inkjet printer maintenance. High-resolution machines are best used every day. Every day maintenance, these maintenance machines can run stably. But when the ink is squeezed, the high-resolution nozzle can't squeeze out the ink. What is going on? Shenyang Oulans collects the possible reasons. The following information is for reference only.

1. Check the ink path ink tube of the coding equipment to see if it is damaged. If there is air in the ink tube, when the ink is squeezed, the ink is not pressed, so the ink is not squeezed out.

2. The nozzle of the printer is completely blocked or blocked, and the ink will not be squeezed out. The high-resolution nozzle ink is easy to dry. If it is not sprayed, it will be completely exposed to the air for a long time, the ink will block the dry-junction nozzle, or it may be blocked if it is not used for a long time without being used.

3. Check whether the nozzle is normal. If the nozzle or the important parts of the nozzle are burnt out, the ink may not be squeezed out.

4, the nozzle voltage is low, the nozzle voltage determines the bending degree of the internal piezoelectric crystal (or can be said to be the degree of unevenness), the high voltage can increase the ink output of the inkjet, the low voltage is reduced, if the voltage is lower, it may not It is also possible to produce ink.

The above four points are the reasons why the nozzle does not squeeze out the ink. The level is limited. If there is any error, please correct me.

Friendly reminder, the situation that the nozzle is not squeezed out of the ink, and most of the daily maintenance is improper, so maintenance is very important. The high-resolution inkjet printer needs daily maintenance and maintenance every day. The maintenance is actually very simple and can be completed in one minute. Please pay attention to maintenance, so that the machine can run more efficiently.