The key to snake egg hatching
1. Temperature Generally speaking, 20 ~ 30 °C is appropriate, put the thermometer in the cylinder, if the temperature is low, you can set a hot water bottle, avoid touching the egg bag. Poffertjes Grill,Poffertjes Maker,Gas Poffertjes Grill,Mini Pancake Machine Guangzhou New Power Catering Equipment Manufacturing Co.,Ltd , http://www.gznewpower.com
2. The humidity should be generally controlled in the relative humidity of 50% to 80%; the cylinder should be placed hygrometer, humidity is too high, snake egg susceptible to mold, if the humidity is too high can open the cylinder head, and set the hot water bottle to promote the distribution of moisture.
3. If there is mildew on the surface of mildew-proof snake eggs, it should be found as soon as possible. After the flannel is tried, apply a greasy flavoxime with a brush to smear it at the point where it grows longer. Put it dry and put it back to the original place. Avoid using antibacterial. Apply ointment, otherwise the oil film will block the pores on the surface of snake eggs, causing the embryos to suffocate and die.
4. To prevent natural enemies such as mice, ants and cockroaches from invading snake eggs, they should be stamped. In order to prevent the entrance of enemies, shallow water can be placed in the cylinder feet, and pesticides can be sprinkled around the cylinder feet. Pesticide should not be brought into the tank.
5. Selection of Ovirapes In order to regulate and maintain the humidity of snake eggs, fresh and clean moss or grass can be selected. It is replaced in two days or so. Some people are accustomed to cover with wet straw. This is not ideal because it tends to produce mildew. .
6. Ovulation of unfertilized eggs or dead fetus eggs placed too long, will rupture and degenerate, thus contaminating other snake eggs; ovirrhea can be used with a built-in light bulb of the wood lice, a small opening slightly smaller than the snake eggs, using the light bulb Light shines in the dark room to test the snake's eggs. If it is difficult to choose between the individual snake eggs, one side can be placed and intensified. (Wu Ai Ling)