We have made a corresponding introduction to the principle and part of the van filter press, and also introduced some of the filter structure of the van filter press. For the understanding of the filter plate, we have a preliminary understanding. Now let me introduce the intention of casting the filter plate of the box filter press.

First, the thickness and size of the filter plate of the chamber filter press . The thickness of the chamber filter press is generally between 45mm and 85mm . This thickness ensures that the filter plate is complete and strong under the strong pressure provided by the filter press. If the filter plate smaller than this thickness provides the lowest pressure in the filter press , it is also unattainable at 1 MPa, and moreover sometimes the filter press provides a pressure of up to 25 MPa. The size of the filter plate is of course determined by the required filtration area and the storage of the filter cake space. In other words, the purpose of the filter plate size is to determine the range of filter plate storage and filtration.

Second, the concave and bottom of the filter plate protrude from the particles and the boss. The filter plate is recessed, of course, in order to make room for the filtered filter cake in the future work of the filter press, so that the solid particles are collected and stored in such a space. The small protruding particles at the bottom are for the friction between the filter plate, the filter press filter cloth and the filter cake in the filtration of the filter press. When the filter cake is excessively stacked, the filter cake is played. Effective support, this is the purpose of the small particles at the bottom. There are 2~4 larger bosses at the bottom . The height of the boss is the same as the height of the edge of the filter plate. It is in the process of the filter press. Under the strong pressure environment, the filter plate can be very Under good transmission pressure, the same pressure can be transmitted in the middle part, so that the pressure is even, and the filter plate can be well protected and supported, and the filter plate is prevented from being partially stressed and cannot be damaged.

Third, the middle of the perforation and the bottom corner of the hole. The perforations in the middle are generally cast into a 100 mm . This is when the filter plate is placed on the filter cloth, and the filtered material flowing into the filter chamber is evenly distributed to each filter chamber. The small hole at the bottom is the water that will be filtered out and is led out of the filter chamber.

The purpose of the filter plate casting style for the van filter press is to introduce you here.