Precautions for repairing shrink wrappers
Injection and Infusion Products
Injection and Infusion Products is our main product series. All of our injection and infusion products have get the CE, ISO and FDA. We also have our own GMP. To make sure the injection and infusion products safe. Our workshop have six 1*20'FCL sterilization container. We could get the quantity of 180*1*20FCL products sterilized in one month. Under this situation, we could make the delivery shorter, about 3-5 days. So kindly don't worry about the delivery. It is about 25-32 days. The delivery will be 32 days, when near the spring festival.
If you are intrested in our products, welcome to contact us and send us requirements.
For health! Professional service, we will be better!
*Related Products:glass syringe,prefilled syringes.
Injection And Infusion Products,Disposable Syringe,Pvc Infusion Bags,Glass Syringe,Prefilled Syringes Hebei Orient Imp. & Exp. Co. Ltd. , https://www.orientmedcare.com
2. For the shrinking machine to ensure the normal operation of the vacuum pump, the vacuum pump motor is not allowed to reverse. The oil level should be checked frequently. The normal oil level is 1/2-3/4 of the oil window (cannot be exceeded). When there is moisture or oil in the vacuum pump. When the color turns black, the new oil should be replaced at this time (usually one or two months of continuous work, 1# vacuum gasoline or 30# gasoline, oil can also be used).
3, the impurity filter should be frequently removed and washed (usually once every 1-2 months, such as packaging debris should shorten the cleaning time).
4. For 2-3 months of continuous operation, the rear cover 30 should be opened to add lubrication to the sliding parts and the switch bumps. The connection activities on the heating rods should be lubricated according to the usage.
5, the decompression, filtration, oil mist triplet 24 should be checked frequently to ensure oil mist, oil in the oil cup (sewing machine oil), the filter cup is waterless.
6, the heating strip, silicone strip should be kept clean, no foreign matter must be adhered, so as not to affect the quality of the seal.
7. On the heating rod, the two-layer adhesive under the heating sheet will be insulated, and should be replaced in time when there is damage, so as to avoid short circuit.
8, the user-supplied working gas source and inflatable gas source, the working pressure of the shrinking machine has been set to 0.3MPa, more suitable, no special circumstances do not adjust too large.
9. The shrinking machine is not allowed to be placed and impacted during the handling process, and it cannot be carried over.
10. There must be a reliable grounding device during installation.
11. It is strictly forbidden to put your hand under the heating rod to prevent injury, and immediately cut off the power in case of emergency.
12. When working, first ventilate and then energize. When the machine is shut down, first cut off the electricity and then cut off the gas.