The main difference between diesel engines and gasoline engines in electronically controlled injection is that the electronically controlled injection system of gasoline engines only controls the air-fuel ratio (the ratio of gasoline to air). The electronically controlled injection system of diesel engines regulates the output size by controlling the injection time. Diesel fuel injection control is determined by the engine speed and accelerator pedal position (throttle lever position). Therefore, the basic working principle is that the computer first calculates the basic fuel injection quantity based on the input signals of the speed sensor and the throttle position sensor, and then corrects the signal according to the sensors such as the water temperature, the intake air temperature, the intake pressure, and then from the control sleeve position. The sensor signal is feedback-corrected to determine the optimum fuel injection.

The electronically controlled diesel injection system consists of sensors, ECUs (computers) and actuators. Its task is to electronically control the fuel injection system, realizing the real-time control of the fuel injection quantity and timing of the fuel injection with operating conditions. Sensors such as rotation speed, temperature and pressure are used to simultaneously input real-time detection parameters into the computer and compare them with the stored parameter values. After processing and calculation, the fuel injection pump, exhaust gas recirculation valve and glow plug actuators are executed according to the optimal values. Control, drive the fuel injection system, so that the diesel engine operating conditions to achieve the best.

Herringbone Milking Parlor for sales

Fish bone Milking Machine, the standard configuration is focused on the release scaffold system, according to user needs can be equipped with quick-opening elevator scaffolding, making more efficient milking machines. It can also be loaded advanced pasture management software, device configuration to achieve the most high-end performance, including accurate electronic measurement of milk, automatic de-cups, feeding cows, estrus, health monitoring(mastitis, hoof inflammation, reproductive and metabolic diseases disease),etc.; apply scientific management and medium-sized ranch.

Currently we work with international companies: Italian Interpuls, USA BOUMATIC company, Israel afimilk companies. My company currently produces and sells a pipeline milking machine, flat type, fish bone style. Mid-mounted, parallel, rotary and other types, its technical characteristics are as follows:

1.     Advanced dual vacuum milking system(optional equipment) imitation calf feeding low vacuum(42-45Kpa) cow nipple sucking massage to make cows in the best condition to complete the entire milking process; squeezed milk is specifically high vacuum(60Kpa) timely and quickly pumped into milk pipeline, effectively ensure the stability of the milking system pressure.

2.     Effective control of mastitis in cows before milking pulsation than technology meet physiological characteristics of pulsation than the technology front, the front breast area ratio of small pulsation ratio breast after large(generally breast area after area than in the previous 15% more milk); breast area while completing the four milking, milking effectively avoid the occurrence of air, reducing the incidence of mastitis.

3.     Prevent overcrowding and premature removal from the design collection cup milk tubes are used to seat all the transparent design, so it can be visually determine whether there is over-milking premature phenomenon and the phenomenon of de-cup;

4.     Unique automatic off cup system(optional equipment) set milk Block built vacuum shut-off valve, auto-off cup without vacuum residue will not produce cow nipples pulling force, but also off the cup action is very gentle,, collection of milk will not fall to the ground seat.

5.     Advanced air cleaning mixed feeding device that can impact the entire column to form the pipeline flow scrub the entire pipeline, effectively improve the quality of the milk.

6.     Hassle U-tube design U-shaped connecting pipe so that the whole milk collection device cleaning without leaving clean corners, to ensure the quality of milk.

7.     Pasture management software(optional configuration) automatically precision measuring devices, computers permanent data storage.Machine, cattle integration management through our hardware and software to be human, bovine, machine together organically, to achieve maximum efficiency.

Herringbone Milking Parlor

Herringbone Milking Parlour,Rotating Type Milking Parlor,Dairy Cow Milking Parlors,Auto Rotating Milking Parlor

Henan Leo Husbandry Equipment Science and Technology Co.ltd , https://www.chinaleodairy.com