How to use biochemical incubator and maintenance
Silica Chromatography Media And Prep Columns UniSil® is a series of monodisperse spherical silica gel designed as matrices for high performance liquid chromatography (HPLC) analysis and purification. Developed by Suzhou NanoMicro with its unique patented technology, all UniSil® products have distinct features such as uniformed particle size, perfectly spherical shape, and outstanding mechanical strength. In addition, NanoMicro`s [State-of-the-Art" microsphere precision manufacturing enables UniSil® products excellent lot-to-lot consistency as well as well-tailored pore size and particle size to serve varied application. All these features provide UniSil® products competitive advantages such as high column efficiency, robust column packing and repacking, quality consistency, etc. UniSil® products have already been widely used in both laboratory and industrial scale separation of synthetic compounds, natural products, and many biomolecules. Through strong offering of the UniSil® product line at commercial scale, NanoMicro is proud to be a leading provider of silica chromatography media. Silica Chromatography Media and Prep Columns,Chromatographic preparative column,column,Silica gel column Suzhou Nanomicro Technology Co., Ltd. , https://www.nanomicro-technology.com
The method of use is as follows:
1. Temperature setting: press the “SET†button. When the decimal value of the lower right corner of a digital tube is illuminated after the temperature is displayed, enter the temperature setting state, and then press the “▲†or “▼†button to confirm the incubator. Set the temperature this time (the set temperature range is 5 °C ~ 50 °C). When the above steps 3 and 4 are completed, press the "ENTER" confirmation button to confirm the current working time of the incubator and the operating temperature (set temperature) in the incubator. Note: After the temperature setting is confirmed, the temperature cannot be set back and forth frequently, so as to avoid frequent compressor starting, causing overload of the compressor and affecting the service life of the compressor.
2. Place the incubator on a flat and solid ground and adjust the two supporting screws at the lower end of the box to make the box stable.
3. Time setting: The time setting includes the setting of “minute†and “hourâ€. Press the “SET†setting button, when the “minute†digital tube displays the lower right corner of the display position, it will enter the “minute†setting state, and then press the “▲†or “▼†button to confirm the “incubation of the incubatorâ€. Minute time (zui is 59 minutes long); press the “SET†button again. When the decimal point in the lower right corner of the “hour†digital tube display position is lit, enter the “hour†setting state, and then press “▲†or “▼â€. "Key to confirm the "hour" time of the incubator this work (zui is 99 hours long). Clinical laboratory 4, plug in the power socket (the power supply should have a good ground), press the "power switch", the display is bright, at this time the display shows the actual temperature and working time in the incubator room.
5. To view the working time and temperature set by the incubator this time, press the “SET†button, the display panel will display the set time and temperature, and then press the “ENTER†button, the display value of the incubator will be restored. Go to the original working state.
Precautions and maintenance:
1. Care must be taken when handling. The angle between the cabinet and the horizontal plane must not be less than 60°.
2, in order to maintain the beauty of the equipment, do not use acid or alkali and other corrosive items to wipe the surface of the box, the box can be dried regularly with a dry cloth.
3. When the temperature is low, there will be condensed water in the incubator. The water in the water tray at the bottom of the tank should be drained regularly.
4. The distance between the incubator and the wall should be greater than 10cm to ensure good cooling of the refrigeration system.
5. When the incubator is out of service, unplug the power cord.
6. The power supply must have a reliable ground wire to ensure reliable contact between the ground wire of the incubator and the ground of the network power supply to prevent leakage or accidental damage caused by the power supply.
7, indoors should be dry, well ventilated, relative humidity is kept below 85%, there should be no corrosive substances, avoid direct sunlight on the incubator.