LRH-150F series biochemical constant temperature incubator operation steps

November 25 10:06:40, 2021

Operation steps 1. Put the items to be cultured into the incubator working room. Keep a certain space in the upper and lower parts to keep the airflow in the working room unblocked and close the door.

2. Turn on the power switch. At this time, the cycle indicator lights up and the motor runs. The intelligent controller PV screen should display the measured temperature in the working room. The SV screen should display the set temperature to be used. At this point, the incubator is in working condition.

Note: If the timing function is not used, the SV screen must be displayed as “0” when the “ST” character is displayed on the PV screen.

3. Set the timing time: see "How to use the timing function"

4. When the machine is turned on, or used for a period of time, or when the season (ambient temperature) changes, the measurement temperature and actual temperature error in the working chamber must be reviewed. For details, see “Instructions for Using Each Function Parameter”.

5. After each use, be sure to dry the water in the workroom and turn off the main power to ensure safety.

Bifidobacterium Bifidum

Bifidobacterium Bifidum,Bifidobacterium Bifidum Powder,Bifidobacterium Bifidum Probiotic,Bifidobacterium Bifidum Supplements

Jiangsu Biodep Biotechnology Co. ,Ltd. , https://www.mbioda.com